What is onboard weighing?
The term "onboard weighing" refers to a weighing system that monitors the load “on board” a vehicle by using load cells, hence, its name. This type of weight measurement is common in tipper trucks, tankers and bin lorries, to mention a few.
10 Benefits of Using Onboard Weighing
1. Increased Accuracy
Onboard weighing systems are much more accurate than traditional methods of weighbridge scales. This is because the weight is measured at the axle rather than the whole vehicle, meaning that the weight is distributed more evenly. This results in a more accurate reading and less chance of overloaded vehicles.
2. Increased Safety
Onboard weighing systems can help reduce the risk of accidents because they weigh the vehicles before they load them onto the transport. It also improves safety by preventing overloaded vehicles from leaving the weighbridge. Aside from fewer chances of accidents occurring, there’s also less wear and tear on the roads.
3. Improved Efficiency
This type of weighing system makes measuring vehicle weights much more efficient. There is no need for the vehicles to stop and wait to be weighed on a separate scale. This saves time and money, which means that you can weigh more vehicles in a shorter time, hence, increasing productivity as well.
4. Reduced Pollution
If you like fewer emissions from vehicles use an onboard weighing system. This helps reduce pollution by preventing overloaded vehicles from leaving the weighbridge.
5. No Overcharging
By providing accurate weight readings for each vehicle, the customers can be sure that they are not being overcharged for their goods. This also helps prevent damage to roads as the vehicles carry the appropriate and allowable amount of load.
6. Fewer Delays
By using an onboard weighing system, you can prevent overloaded vehicles from leaving the weighbridge, hence, reducing delays. This means that there is less congestion on the roads and fewer delays for other road users.
7. Greater Flexibility
Comparably, onboard weighing systems offer greater flexibility than traditional weighbridge scales. It offers applicability to different types of vehicles, including cars, vans, trucks and buses. Consequently, you can also use onboard weighing for a wide range of activities, such as weighing goods at a distribution centre or weighing vehicles at a garage.
8. Easy to Use
If you are looking for a weight measuring system for vehicles that require minimal training to operate, onboard weighing might just be what you need. Many people typically use this in varying applications.
The best thing about onboard weighing is that it is easy to operate. Even those who are not familiar with it can effortlessly get used to the process of weighing vehicles in no time.
9. More Cost-Efficient
Onboard weighing systems are cost-effective because they save time and money. When the weighing process of vehicles continuously flows without interruptions like moving from one platform to another, then it saves you time. At this rate, you will also reduce the cost spent on the weighing process.
10. Environmentally Friendly
They reduce road congestion, hence, fewer emissions from the vehicles and less wear and tear on the roads. Onboard weighing promotes environmental safeguards as it helps lower carbon footprint from vehicle pollution.
How do Onboard Weighing Systems Work?
Onboard weighing systems work by measuring the weight of a vehicle at the axle rather than the whole vehicle. This means that the weight is distributed more evenly and therefore provides more accuracy. The weighbridge then calculates the weight of the vehicle based on this information.
What is a weighbridge?
A weighbridge is a large platform that is usually located at the entrance to a truck stop or garage and is used to weigh vehicles before they enter or leave certain premises.
Onboard Weighing Applications
Onboard weighing systems ensure that the products are correctly weighed and labelled. Doing so helps customers or clients to pay for the right amount and prevent being overcharged for excess weight. In the same manner, companies will not suffer loss in case of underweight readings.
Here are some applications that onboard weighing is most beneficial:
- Weighing goods at distribution centres to guarantee end-buyers that they get what they paid for.
- Measuring the weight of vehicles at a garage. This is very helpful in ensuring that vehicles are of the right weight, especially after repairing or changing tires.
- Similarly, it can also be used in car parks. This is most advantageous, especially for levelled car parks.
- They weigh containers at a port to ensure the safety of vessels while traversing the seas.
- Weighing waste at a landfill or recycling plant.
- Measuring the weight of packages at a postal sorting office. This helps ensure that each parcel is paid for correctly.
- The most common application of onboard weighing is getting the weight readings of vehicles at a weighbridge.
- Weighing livestock at a market. This is advantageous for those who buy and sell livestock products by weight.
- Weighing vehicles at a scrapyard.
If you are looking for a way to improve the efficiency of your operation, the best thing to do is to find a load cell provider who can offer a flexible and cost-effective means to boost your onboard weighing system according to your commercial or industrial needs.
Contact Meltrons Australia today for your weighing system needs!